
9
Intel-based
F600 – 3U CompactPCI
®
Side Card for SATA/Legacy I/O
■ 4 HP extension for 3U Intel
®
SBCs
F14, F15, F17, F18
■ 1-4 COMs via SA-Adapters™
■ Optical isolation depending on SA-Adapter™
■ 2.5" SATA hard-disk slot
■ Additional SATA port for external device
I/O
■ Up to four UARTs
■ From four CPU-controlled USB channels
■ Two at front panel
■ Two on board, instead of on-board SATA
device, on request
■ Physical interface using SA-Adapters™ via
10-pin connectors
■ RS232..RS485, isolated or not: for free use in
system (e. g. cable to front)
■ Data rates up to 1 Mbit/s
■ FIFO receive and transmit buffers for high
data throughput
■ Handshake lines: full support; lines depend
on SA-Adapters™
Mass Storage
■ Serial IDE (SATA)
■ One port for on-board 2.5" hard-disk drive
■ One port for external device
(e.g. SATA DVD Drive)
■ Transfer rates up to 150MB/s (depends on
hard disk, 28MB/s for 2.5" hard disk)
■ RAID level 0/1 support (depends on CPU
board)
Miscellaneous
■ CompactPCI
®
J1 and J2 are assembled for
increased mechanical stability and/or for
power supply via J1
Electrical Specifications
■ Supply voltage/power consumption:
■ +5V (-3%/+5%), 21mA typ. (with two SA1
SA-Adapters™, w/o hard disk)
■ +3.3V (-3%/+5%), 50mA typ. (with two SA1
SA-Adapters™, w/o hard disk)
■ MTBF: 1,663,000h @ 40°C (derived from
MIL-HDBK-217F)
Mechanical Specifications
■ Dimensions: conforming to CompactPCI
®
specification for 3U boards
■ Weight: 145g (w/o hard disk)
Environmental Specifications
■ Temperature range (operation):
■ -40..+85°C (depending on hard disk; please
refer to the hard disk specifications for
possible limits)
■ Airflow: min. 10m³/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation):
max. 95% non-condensing
■ Relative humidity (storage):
max. 95% non-condensing
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
■ Conformal coating on request
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 (radio
disturbance), IEC1000-4-2 (ESD) and
IEC1000-4-4 (burst) with regard to CE
conformity
Software Support
■ Driver software for the UART interface for
Windows
®
, Linux (to be verified), VxWorks
®
(to be verified), QNX
®
(on request)
USB 2.0
USB 2.0
USB 2.0
USB 2.0
IDE (SATA)
Board-to-
Board
Connector
CPU Board
IDE (SATA)
USB-to-
UART bridge
F
USB-to-
UART bridge
B
On-board
HDD
USB-to-
UART bridge
USB-to-
UART bridge
External
Device
B
B SA
FB SA
B SA
B SA
F
F
2nd
front
panel
F
B
Front panel
connector
On board
connector
Options
SA SA-Adapter
MEN 3U CompactPCI and CompactPCI Express
Komentáře k této Příručce